Webb Wheel Hubs

Found 205 matches. Click on hub numbers below for more information.

To compare models, check box next to part number and click on any "compare" link.
C Photo Hub Model
Number
Description Mounting Type Disc Wheel Notes Thread Direction

Compare
10019--ML photo
            
10019--ML10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Inboard Drum (3/4"-16) Shoulder Stud BSNSteel/Alum (Dual)This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655

Drum Fasteners: Flat Washer--P/N 257. Lock Nut: P/N 75716

Left Thread Direction

Compare
10019--MR photo
            
10019--MR10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Inboard Drum (3/4"-16) Shoulder Stud BSNSteel/Alum (Dual)This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655

Drum Fasteners: Flat Washer--P/N 257. Lock Nut: P/N 75716

Right Thread Direction

Compare
10019--N photo
            
10019--N10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Inboard Drum (3/4"-16) Shoulder Stud BSNN/AThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655

Drum Fasteners: Flat Washer--P/N 257. Lock Nut: P/N 75716

No Fastening

Compare
10069--NT photo
            
10069--NT10 Stud Hub w/11.25 Dia. Bolt Circle . Uses Inboard Drum (3/4"-16) Shoulder Stud. For Single Tire Applications.BSNN/AThis Hub Requires Special Spider Location. Hub Flange is 2.71" Outboard from Standard 1001 Hub.

Grease Hubcap Kit: 73655

Drum Fasteners: Flat Washer--P/N 257. Lock Nut: P/N 75716

No Fastening

Compare
10209--ML photo
            
10209--ML10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (3/4"-16) StudBSNSteel or AlumThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

Left Thread Direction

Compare
10209--MR photo
            
10209--MR10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (3/4"-16) StudBSNSteel or AlumThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

Right Thread Direction

Compare
10209--N photo
            
10209--N10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (3/4"-16) StudBSNSteel or AlumThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

No Fastening

Compare
10209--NT photo
            
10209--NT10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (3/4"-16) Shoulder Stud BSNN/AThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

No Fastening

Compare
1020P photo
            
1020P10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (3/4"-16) StudBSNSteel or AlumBoxed Hub. 10209--N comes boxed ready to stock on the shelf.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

No Fastening

Compare
photo not available
            
10519--MLT8010 Stud Hub w/8.75 Dia. Bolt Circle. Uses Inboard Drum (3/4"-16) Shoulder Stud BSNSteel/Alum (Dual)This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

Drum Fasteners: Flat Washer--P/N 257. Lock Nut: P/N 75716

Left Thread Direction

Compare
photo not available
            
10519--MRT8010 Stud Hub w/8.75 Dia. Bolt Circle. Uses Inboard Drum (3/4"-16) Shoulder Stud BSNSteel/Alum (Dual)This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

Drum Fasteners: Flat Washer--P/N 257. Lock Nut: P/N 75716

Right Thread Direction

Compare
10519--NT80 photo
            
10519--NT8010 Stud Hub w/8.75 Dia. Bolt Circle. Uses Inboard Drum (3/4"-16) Shoulder Stud BSNN/AThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

Drum Fasteners: Flat Washer--P/N 257. Lock Nut: P/N 75716

No Fastening

Compare
10569--NT80 photo
            
10569--NT806 Stud Hub w/8.75 Dia. Bolt Circle. Uses Inboard Drum (3/4"-16) Shoulder Stud BSNN/AThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

Drum Fasteners: Flat Washer--P/N 257. Lock Nut: P/N 75716

No Fastening

Compare
12213--ML photo
            
12213--ML10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Inboard Drum - (3/4"-16) Shoulder Stud BSNSteel/Alum (Dual)Obsolete with no replacement

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

Left Thread Direction

Compare
12213--MR photo
            
12213--MR10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Inboard Drum - (3/4"-16) Shoulder Stud BSNSteel/Alum (Dual)Obsolete with no replacement

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

Right Thread Direction

Compare
12213--N photo
            
12213--N10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Inboard Drum - (3/4"-16) Shoulder Stud BSNN/AObsolete with no replacement

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Grease Hubcap Kit: 73655

No Fastening

Compare
photo not available
            
12513--N10 Stud Hub w/ 8.75 Dia Bolt Circle. Uses Inboard mount (3/4"-16) Shoulder Stud BSNN/AStuds sold separately. 139902 = R , 139913 = L

No Fastening

Compare
1320Z--NT photo
            
1320Z--NT*Obsolete - 10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum - (3/4"-16) Serrated Stud BSNN/AObsolete - Use 23231--0T Assembly Only - Studs sold separately.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

No Fastening

Compare
1331Z--NT photo
            
1331Z--NT10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Inboard Drum - (3/4" - 16) Shoulder Stud BSNN/AThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Drum Fasteners: Flat Washer--P/N 257. Lock Nut: P/N 75716

No Fastening

Compare
1521F--NT photo
            
1521F--NT10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum - (1 1/8" - 16) Serrated StudBSNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.62) back plate thickness.

Grease Hubcap Kit: 73655

No Fastening

Compare
photo not available
            
1530G--N10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum - (1 1/8" - 16) Serrated StudBSNN/AStud Standout (Cast drums): Dimensions shown are brake drums having (.62) back plate thickness. Add (.12) to these dimensions when using brake drums having (.50) back plate thickness.

Grease Hubcap Kit: 73655

No Fastening

Compare
photo not available
            
1530G--NT10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum - (1 1/8" - 16) Serrated StudBSNN/AStud Standout (Cast drums): Dimensions shown are brake drums having (.62) back plate thickness. Add (.12) to these dimensions when using brake drums having (.50) back plate thickness.

Grease Hubcap Kit: 73655

No Fastening

Compare
photo not available
            
15401--N10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum - (1 1/8" - 16) Serrated StudBSNN/AStud Standout (Cast drums): Dimensions shown are brake drums having (.62) back plate thickness. Add (.12) to these dimensions when using brake drums having (.50) back plate thickness.

Grease Hubcap Kit: 73655

No Fastening

Compare
photo not available
            
15501--ML6 Stud Hub w/8.75 Dia. Bolt Circle. For Disc Brake Applications with ABS - (3/4" - 16) Serrated StudBSNN/AOEM Part Number

Afm P/N 15501--N. No studs installed

Rotor Mounting Bolt: QTY 6--P/N 87511(3/4"-10 Thread Dia.). Rotor Mounting Bolt Washer: QTY 6--P/N 257

Hubcap not Available from Webb

Left Thread Direction

Compare
photo not available
            
15501--MR6 Stud Hub w/8.75 Dia. Bolt Circle. For Disc Brake Applications with ABS - (3/4" - 16) Serrated StudBSNN/AOEM Part Number

Afm P/N 15501--N. No studs installed

Rotor Mounting Bolt: QTY 6--P/N 87511(3/4"-10 Thread Dia.). Rotor Mounting Bolt Washer: QTY 6--P/N 257

Hubcap not Available from Webb

Right Thread Direction

Compare
photo not available
            
15501--N6 Stud Hub w/8.75 Dia. Bolt Circle. For Disc Brake Applications with ABS - (3/4" - 16) Serrated StudBSNN/AHubcap not Available from Webb

Rotor Mounting Bolt: QTY 6--P/N 87511(3/4"-10 Thread Dia.). Rotor Mounting Bolt Washer: QTY 6--P/N 257

No Fastening

Compare
photo not available
            
1699Aluminum 10-stud drive hub 11.25" BCBSNSteel/Alum (Dual)Obsolete. Call for replacement

Drive stud pattern: 8 @ .62". 7.00" Dia Bolt Circle

No Fastening

Compare
20231--0T photo
            
20231--0T10 Stud Hub w/11.25 (285.75MM)Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

No Fastening

Compare
20231--3T photo
            
20231--3T10 Stud Hub w/11.25 (285.75MM)Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNSteel (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

Right Thread Direction

Compare
20231--5T photo
            
20231--5T10 Stud Hub w/11.25 (285.75MM)Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNAluminum (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

Right Thread Direction

Compare
photo not available
            
20231--MLT10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (3/4" - 16) Serrated Stud BSNSteel/Alum Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

Left Thread Direction

Compare
photo not available
            
20231--MRT10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (3/4" - 16) Serrated Stud BSNSteel/AlumStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

Right Thread Direction

Compare
photo not available
            
20231UQ3T10 Stud Hub w/11.25 (285.75MM)Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNSteel (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

Right Thread Direction

Compare
2023PT photo
            
2023PT10 Stud Hub w/11.25 (285.75MM)Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/ABoxed Hub. 20231--0T comes boxed ready to stock on the shelf.

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

No Fastening

Compare
20271--0 photo
            
20271--08 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNN/AUse 20271--0-71


Compare
20271--0-71 photo
            
20271--0-718 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNN/ADesigned with oil fill plug


Compare
20271--0T photo
            
20271--0T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNN/AUse 20271--0T-71


Compare
20271--0T-71 photo
            
20271--0T-718 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNN/A100 tooth ABS

Designed with oil fill plug


Compare
20271--0T80 photo
            
20271--0T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

No Fastening

Compare
20271--0T80-71 photo
            
20271--0T80-718 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNN/A80 tooth ABS

Designed with oil fill plug

Right Thread Direction

Compare
20271--3 photo
            
20271--38 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Use 20271--3T

Right Thread Direction

Compare
20271--3T photo
            
20271--3T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Right Thread Direction

Compare
20271--3T80 photo
            
20271--3T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

Right Thread Direction

Compare
20271--3T80-71 photo
            
20271--3T80-718 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Designed with oil fill plug

Right Thread Direction

Compare
photo not available
            
20271--48 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Use 20271--3T

Right Thread Direction

Compare
photo not available
            
20271--58 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Right Thread Direction

Compare
photo not available
            
20271--5T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Grease Hubcap Kit: 73655.

Right Thread Direction

Compare
photo not available
            
20271--5T80-718 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Designed with oil fill plug

Right Thread Direction

Compare
20271CW3 photo
            
20271CW38 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Use 20271CW3T80. Hub and Drum Assembly

Right Thread Direction

Compare
photo not available
            
20271CW3T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Right Thread Direction

Compare
photo not available
            
20271CW48 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Use 20271CW3T80

Right Thread Direction

Compare
photo not available
            
20271CW4T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Use 20271CW3T80

Right Thread Direction

Compare
photo not available
            
20271CW58 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. 20271CW5T80-71 - 80T ABS

Right Thread Direction

Compare
photo not available
            
20271CW5T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. 20271CW5T80-71 - 80T ABS

Right Thread Direction

Compare
photo not available
            
20271CW68 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. 20271CW5T80-71 - 80T ABS

Right Thread Direction

Compare
photo not available
            
20271CW6-108 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. 20271CW5T80-71 - 80T ABS

Right Thread Direction

Compare
photo not available
            
20271CW6T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. 20271CW5T80-71 - 80T ABS

Right Thread Direction

Compare
photo not available
            
20271CW6T80-108 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. 20271CW5T80-71 - 80T ABS

Right Thread Direction

Compare
photo not available
            
20272CW3T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)OEM Part Number. AFM 20271CW3T80-71 - 80T ABS

Right Thread Direction

Compare
photo not available
            
20272CW4T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Obsolete. Use 20271CW3T80-71

Right Thread Direction

Compare
photo not available
            
20272CW5T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. Use 20271CW5T80-71

Right Thread Direction

Compare
photo not available
            
20272CW6T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. Use 20271CW5T80-71

Right Thread Direction

Compare
photo not available
            
20275CW38 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Obsolete. Use 20271CW3T80-71

Right Thread Direction

Compare
photo not available
            
20275CW3T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Obsolete. Use 20271CW3T80-71

Right Thread Direction

Compare
photo not available
            
20275CW4T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Obsolete. Use 20271CW3T80-71

Right Thread Direction

Compare
photo not available
            
20275CW58 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. Use 20271CW5T80-71

Right Thread Direction

Compare
photo not available
            
20275CW5T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. Use 20271CW5T80-71

Right Thread Direction

Compare
photo not available
            
20275CW6-108 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Obsolete. Use 20271CW5T80-71

Right Thread Direction

Compare
20281--0T photo
            
20281--0T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNN/AThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. All drums listed for use with 8-hole, 275MM B.C. USA Mounting Systems.

Grease Hubcap Kit: 73655

Right Thread Direction

Compare
photo not available
            
20281--3T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNSteel (Dual)This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. All drums listed for use with 8-hole, 275MM B.C. USA Mounting Systems.

Grease Hubcap Kit: 73655

Right Thread Direction

Compare
photo not available
            
20281--5T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNAluminum (Dual)This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. All drums listed for use with 8-hole, 275MM B.C. USA Mounting Systems.

Grease Hubcap Kit: 73655

Right Thread Direction

Compare
photo not available
            
203310 Stud hub w/ 13.189 Dia. Bolt CircleFNObsolete with no replacement

Right Thread Direction

Compare
photo not available
            
20731--0TADB 10 Stud Hub /11.25 (285.75MM)Dia. Bolt Circle. Uses U-Shaped Rotor (M22x1.5) Serrated StudFNN/ANo Fastening

Compare
photo not available
            
20731--5TADB 10 Stud Hub /11.25 (285.75MM)Dia. Bolt Circle. Uses U-Shaped Rotor (M22x1.5) Serrated StudFNAluminum (Dual)Right Thread Direction

Compare
photo not available
            
20741--0TFNN/ANo Fastening

Compare
photo not available
            
21031--3TFNSteel (Dual)AFM Replacement 20231--3T

Right Thread Direction

Compare
photo not available
            
23231--0T10 Stud Hub w/11.25 Dia. Bolt Circle. Threaded Hubcap. Uses Outboard Drum BSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. This hub is approved for the "Super Single" Tire with 2.00 outset - Hub Dynamic Capacity is reduced to 11,000 lbs.

No Fastening

Compare
23231--3T photo
            
23231--3T10 Stud Hub w/11.25 Dia. Bolt Circle. Threaded Hubcap. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNSteel (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. This hub is approved for the "Super Single" Tire with 2.00 outset - Hub Dynamic Capacity is reduced to 11,000 lbs.

Right Thread Direction

Compare
23231--5T photo
            
23231--5T10 Stud Hub w/11.25 Dia. Bolt Circle. Threaded Hubcap. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNAluminum (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. This hub is approved for the "Super Single" Tire with 2.00 outset - Hub Dynamic Capacity is reduced to 11,000 lbs.

Right Thread Direction

Compare
photo not available
            
2323PT10 Stud Hub w/11.25 Dia. Bolt Circle. Threaded Hubcap. Uses Outboard DrumBSN or FNN/ABoxed Hub. 23231--0T comes boxed ready to stock on the shelf.

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. This hub is approved for the "Super Single" Tire with 2.00 outset - Hub Dynamic Capacity is reduced to 11,000 lbs.

No Fastening

Compare
photo not available
            
23431--0T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Bolt-on Hubcap. Uses Outboard Drum BSN or FNN/AThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

No Fastening

Compare
23431--3T photo
            
23431--3T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Bolt-on Hubcap. Uses Outboard Drum - (M22 x 1.5) Serrated Stud FNSteel (Dual)This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Right Thread Direction

Compare
23431--5T photo
            
23431--5T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Bolt-on Hubcap. Uses Outboard Drum - (M22 x 1.5) Serrated Stud FNAluminum (Dual)This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. A longer stud standout is not necessary when using Grade 8 inner cap nuts with aluminum disc wheels.

Right Thread Direction

Compare
photo not available
            
2343PT10 Stud Hub w/11.25 Dia. Bolt Circle. Bolt-on Hubcap. Uses Outboard DrumBSN or FNN/ABoxed Hub. 23431--0T comes boxed ready to stock on the shelf.

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. This hub is approved for the "Super Single" Tire with 2.00 outset - Hub Dynamic Capacity is reduced to 11,000 lbs.

Bolt-on Hubcap

No Fastening

Compare
photo not available
            
23471--0T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNN/ANo Fastening

Compare
photo not available
            
23471--3T808 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Right Thread Direction

Compare
photo not available
            
23481--0T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNN/ARight Thread Direction

Compare
photo not available
            
24011--0T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

No Fastening

Compare
photo not available
            
24011--3T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNSteel (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
24011--MLT10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum - (3/4" - 16) Serrated StudBSNSteel/AlumStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Left Thread Direction

Compare
photo not available
            
24011--MRTBSNSteel or AlumRight Thread Direction

Compare
photo not available
            
24311--02431 hub - 13.189 BC. No studsFNN/ANo Fastening

Compare
photo not available
            
25061--0T10 Stud Hub with 11.25 (285.75mm) Dia. Bolt Circle. Uses Outboard Drum BSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick.

5.06" offset. Hubcap not available from Webb

No Fastening

Compare
photo not available
            
25191--1T10 Stud Hub w/11.25 (285.75mm) Dia. Bolt Circle. Uses Outboard Drum FNSteel (Single)OEM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness

Hubcap not available from Webb

Right Thread Direction

Compare
photo not available
            
25191--3T10 Stud Hub w/11.25 (285.75mm) Dia. Bolt Circle. Uses Outboard Drum FNAluminum (Single)OEM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness

Hubcap not available from Webb

Right Thread Direction

Compare
photo not available
            
25201--0T10 Stud Hub with 11.25 (285.75mm) Dia. Bolt Circle. Uses Outboard Drum BSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick.

5.44" offset. Hubcap not available from Webb

No Fastening

Compare
photo not available
            
25201--1T10 Stud Hub with 11.25 (285.75mm) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated Stud FNSteel (Single)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick

5.44" offset. Hubcap not available from Webb

Right Thread Direction

Compare
photo not available
            
25201--1T10 Stud Hub w/11.25 (285.75mm) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated Stud FNSteel (Single)OEM & AFM Part Number

5.44" offset. Hubcap not available from Webb

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness

Hubcap not available from Webb

Right Thread Direction

Compare
25201--3T photo
            
25201--3T10 Stud Hub with 11.25 (285.75mm) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated Stud FNAluminum (Single)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick

5.44" offset. Hubcap not available from Webb

Right Thread Direction

Compare
25201--3T photo
            
25201--3T10 Stud Hub w/11.25 (285.75mm) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated Stud FNAluminum (Single)OEM & AFM Part Number

5.44" offset. Hubcap not available from Webb

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness

Hubcap not available from Webb

Right Thread Direction

Compare
photo not available
            
25261--0T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness

Hubcap not available from Webb.

Right Thread Direction

Compare
photo not available
            
25261--1T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNSteel (Single)OEM & AFM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness

Hubcap not available from Webb.

Right Thread Direction

Compare
photo not available
            
25261--3T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNAluminum (Single)OEM Part Number

AFM P/N 25261--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness

Hubcap not available from Webb.

Right Thread Direction

Compare
photo not available
            
25301--010 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick

Grease Hubcap Kit 73655

No Fastening

Compare
photo not available
            
25301--0T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick

Grease Hubcap Kit 73655

No Fastening

Compare
photo not available
            
25301--1T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNSteel (Single)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick

Grease Hubcap Kit 73655

Right Thread Direction

Compare
photo not available
            
25301--1T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNSteel (Single)OEM & AFM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Right Thread Direction

Compare
photo not available
            
25301--3T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNAluminum (Single)OEM Part Number

AFM P/N 25301--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Right Thread Direction

Compare
photo not available
            
25301--7T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNAluminum (Single)OEM Part Number

AFM P/N 25301--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Right Thread Direction

Compare
photo not available
            
25331--0T10 Stud Hub with 13.189 (355MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNN/AGrease Hubcap Kit 73655

No Fastening

Compare
photo not available
            
25331--1T10 Stud Hub w/13.189 (335MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNSteel (Single)OEM Part Number

AFM P/N 25331--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Right Thread Direction

Compare
photo not available
            
25331--3T10 Stud Hub w/13.189 (335MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNAluminum (Single)OEM Part Number

AFM P/N 25331--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Right Thread Direction

Compare
photo not available
            
25401--0T10 Stud Hub with 11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick

Grease Hubcap Kit 73655

No Fastening

Compare
photo not available
            
25401--PLT10 Stud Hub with 11.25 Dia. Bolt Circle. Uses Outboard Drum - (3/4" - 16) Serrated Stud BSNSteel (Single)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick

Grease Hubcap Kit 73655

Left Thread Direction

Compare
photo not available
            
25401--PRT10 Stud Hub with 11.25 Dia. Bolt Circle. Uses Outboard Drum - (3/4" - 16) Serrated Stud BSNSteel (Single)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thick

Grease Hubcap Kit 73655

Right Thread Direction

Compare
photo not available
            
25411--1T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum. (M22 x 1.5) Serrated StudFNSteel (Single)OEM Part Number

AFM P/N 25411--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Hubcap not Available from Webb

Right Thread Direction

Compare
photo not available
            
25411--3T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum. (M22 x 1.5) Serrated StudFNAluminum (Single)OEM Part Number

AFM P/N 25411--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Hubcap not Available from Webb

Right Thread Direction

Compare
photo not available
            
25481--0T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum. (M22 x 1.5) Serrated Stud ObsoleteFNSteel (Single)Obsolete - Click Here for Service Bulletin #167

AFM P/N 25481--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Hubcap not Available from Webb

Right Thread Direction

Compare
photo not available
            
25481--1T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum. (M22 x 1.5) Serrated Stud ObsoleteFNSteel (Single)Obsolete - Click Here for Service Bulletin #167

AFM P/N 25481--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Hubcap not Available from Webb

Right Thread Direction

Compare
photo not available
            
25481--3T10 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum. (M22 x 1.5) Serrated Stud ObsoleteFNAluminum (Single)Obsolete - Click Here for Service Bulletin #167

AFM P/N 25481--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.12) from these dimensions when using brake drums having (.62) back plate thickness. Add (.25) when using brake drums having (.25) back plate thickness.

Hubcap not Available from Webb

Right Thread Direction

Compare
photo not available
            
25501--08 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud. ABS Applications OnlyFNN/AHubcap not Available from Webb

Rotor Mounting Bolt: QTY 6--P/N 87511(3/4"-10 Thread Dia.). Rotor Mounting Bolt Washer: QTY 6--P/N 257

No Fastening

Compare
photo not available
            
25501--38 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud. ABS Applications OnlyFNAluminum (Single)OEM Part Number

AFM P/N 25501--0T. No studs installed

Hubcap not Available from Webb

Rotor Mounting Bolt: QTY 6--P/N 87511(3/4"-10 Thread Dia.). Rotor Mounting Bolt Washer: QTY 6--P/N 257

Right Thread Direction

Compare
photo not available
            
25601--02560 Hub Assembly with cups. FNN/AStuds sold separatley.

Right Thread Direction

Compare
photo not available
            
25681--38 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud. ABS Applications OnlyFNAluminum (Single)OEM Part Number

AFM P/N 25681--0. No studs installed - 101191

Hubcap not Available from Webb

Rotor Mounting Bolt: QTY 10--P/N 85612 (9/16"-12 Thread Dia.).

Right Thread Direction

Compare
photo not available
            
25681--58 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud. ABS Applications OnlyFNAluminum (Single)OEM Part Number

AFM P/N 25681--0. No studs installed - 101164

Hubcap not Available from Webb

Rotor Mounting Bolt: QTY 10--P/N 85612 (9/16"-12 Thread Dia.).

Right Thread Direction

Compare
photo not available
            
25681--08 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud. ABS Applications OnlyFNAluminum (Single)AFM P/N 25681--0. Order Studs Separatly

Hubcap not Available from Webb

Rotor Mounting Bolt: QTY 10--P/N 85612 (9/16"-12 Thread Dia.).

Right Thread Direction

Compare
photo not available
            
25731--3T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud.FNAluminum (Single)OEM Part Number

AFM replacement 25731--5T. Longer stud standout.

Hubcap not Available from Webb

Right Thread Direction

Compare
photo not available
            
25741--3T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud.FNAluminum (Single)Right Thread Direction

Compare
photo not available
            
25741XM3T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud.FNAluminum (Single)Hub Assembly

AFM Hub Assembly Replacement 25741--3T

Rotor Mounting Bolt: QTY 10--P/N 85612 (9/16"-12 Thread Dia.).

Right Thread Direction

Compare
photo not available
            
25711--1T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud.FNSteel (Single)Hub Assembly

Hubcap not Available from Webb

Rotor Mounting Bolt: QTY 10--P/N 85711 (5/8"-11 Thread Dia.).

Right Thread Direction

Compare
photo not available
            
25791--3T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud.FNAluminum (Single)Hub Assembly

Rotor Mounting Bolt: QTY 10--P/N 85711 (5/8"-11 Thread Dia.).

Right Thread Direction

Compare
photo not available
            
25811--3T10 Stud hub w/ 11.25 Dia Bol Circle. 945 axleFNAlum Dynamic Capacity: 8,000 lbs

Right Thread Direction

Compare
photo not available
            
26051--08 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Disc Brake Rotor. (M22 x 1.5) Serrated Stud ABS Applications OnlyFNN/AThis Hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Rotor Mounting Bolt: Qty: 6--P/N 87511 (Thread Diameter: 3/4"-10) Rotor Mounting Bolt Washer: Qty: 6--P/N 257.Drive Stud Drilled M12 x 1.75 for Capscrew

No Fastening

Compare
photo not available
            
26061--08 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud ABS Applications OnlyFNN/AThis Hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Rotor Mounting Bolt: Qty: 6--P/N 87511 (Thread Diameter: 3/4"-10). Rotor Mounting Bolt Washer: Qty: 6--P/N 257. Drive Stud: P/N 156226 (9/16"-18)

No Fastening

Compare
photo not available
            
26061--18 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud ABS Applications OnlyFNOEM Part Number

AFM P/N 26061--0. No studs installed

This Hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Rotor Mounting Bolt: Qty: 6--P/N 87511 (Thread Diameter: 3/4"-10). Rotor Mounting Bolt Washer: Qty: 6--P/N 257. Drive Stud: P/N 156226 (9/16"-18)

Right Thread Direction

Compare
photo not available
            
26061--78 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated Stud ABS Applications OnlyFNSteel/AlumOEM Part Number

AFM P/N 26061--0. No studs installed

This Hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Rotor Mounting Bolt: Qty: 6--P/N 87511 (Thread Diameter: 3/4"-10). Rotor Mounting Bolt Washer: Qty: 6--P/N 257. Drive Stud: P/N 156226 (9/16"-18)

Right Thread Direction

Compare
photo not available
            
26081--0T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNN/AThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Drive Stud: P/N: 152030 (1/2"-20)

No Fastening

Compare
photo not available
            
26081--1T8 Stud Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNOEM Part Number

AFM P/N 26081--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 152032 (1/2"-20). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
26101--5T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNAluminum (Dual)OEM Part Number

AFM P/N 26101--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 152032 (1/2"-20). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
26101--7T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNSteel/AlumOEM Part Number

AFM P/N 26101--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 152032 (1/2"-20). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
26141--0T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This Hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Drive Stud: P/N: 152030 (1/2"-20)

No Fastening

Compare
photo not available
            
26141--5T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard DrumFNAluminum (Dual)OEM Part Number

AFM P/N 26141--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 152032 (1/2"-20). This Hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
26141--7T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard DrumFNSteel/AlumOEM Part Number

AFM P/N 26141--0T. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 152032 (1/2"-20). This Hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
26331--0T-7110 Stud Hub w/13.189 (335MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.09) from these dimensions when using brake drums having (.59) back plate thickness.

This Hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Short Drive, Drive Stud P/N:175032 (3/4"-10) x 8. 7.00" Bolt Circle

Oil Fill Plug Installed

No Fastening

Compare
photo not available
            
26351--0T10 Stud Hub w/13.189 (335MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.09) from these dimensions when using brake drums having (.59) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

No Fastening

Compare
photo not available
            
26351--3T-7110 Stud Hub w/13.189 (335MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)OEM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.09) from these dimensions when using brake drums having (.59) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
26351--5T-7110 Stud Hub w/13.189 (335MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)OEM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.09) from these dimensions when using brake drums having (.59) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
26361--0T10 Stud Hub w/13.189 (335MM) Dia. Bolt Circle. Uses Outboard Drum - (M22 x 1.5) Serrated StudFNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.09) from these dimensions when using brake drums having (.59) back plate thickness.

This Hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Short Drive, Drive Stud P/N: 161832 (5/8"-18) x 8. 7.00" Bolt Circle

No Fastening

Compare
26431--0T photo
            
26431--0TLong Barrel Hub; 10 Stud Hub w/11.25 (285.75 MM) Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backface

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Long Drive, Drive Stud P/N: 161832 (5/8"-18) x 8. 7.00" Bolt Circle

No Fastening

Compare
26431--3T photo
            
26431--3TLong Barrel Hub; 10 Stud Hub w/11.25 (285.75 MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)OEM & AFM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backplate thickness.

Drive Stud: P/N: 161834 (OEM # - 5/8"-18); 161832 (AFM # - 5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
26431--5T photo
            
26431--5TLong Barrel Hub; 10 Stud Hub w/11.25 (285.75 MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)OEM & AFM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backplate thickness.

Drive Stud: P/N: 161834 ((OEM # - 5/8"-18); 161832 (AFM # - 5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
26431--9TLong Barrel Hub; 10 Stud Hub w/11.25 (285.75 MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNOEM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backplate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
26431--MLTLong Barrel Hub; 10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (3/4" - 16) Serrated StudBSNSteel/AlumStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backface

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Long Drive, Drive Stud P/N: 161832 (5/8"-18) x 8. 7.00" Bolt Circle

Left Thread Direction

Compare
photo not available
            
26431--MRTLong Barrel Hub; 10 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (3/4" - 16) Serrated StudBSNSteel/AlumStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backface

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Long Drive, Drive Stud P/N: 161832 (5/8"-18) x 8. 7.00" Bolt Circle

Right Thread Direction

Compare
photo not available
            
26531--0TShort Barrel Hub; 10 Stud Hub w/11.25 (285.75 MM) Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStandout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backface

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. Stud standout (cast drums).

Short Drive, Drive Stud P/N:175032 (3/4"-10) x 8. 7.00" Bolt Circle

No Fastening

Compare
photo not available
            
26531--3TShort Barrel Hub; 10 Stud Hub w/11.25 (285.75 MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backface

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. Stud standout (cast drums).

Short Drive, Drive Stud P/N:175032 (3/4"-10) x 8. 7.00" Bolt Circle

Right Thread Direction

Compare
26531--5T photo
            
26531--5TShort Barrel Hub; 10 Stud Hub w/11.25 (285.75 MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backface

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. Stud standout (cast drums).

Short Drive, Drive Stud P/N:175032 (3/4"-10) x 8. 7.00" Bolt Circle

Right Thread Direction

Compare
photo not available
            
26561--0TShort Barrel Hub; 10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backface

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. Stud standout (cast drums)

Short Drive, Drive Stud P/N: 161832 (5/8"-18) x 8. 7.00" Bolt Circle

No Fastening

Compare
photo not available
            
26561--3TShort Barrel Hub; 10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness. Add (.25) to these dimensions when using brake drums having (.25) backface

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. Stud standout (cast drums)

Short Drive, Drive Stud P/N: 161832 (5/8"-18) x 8. 7.00" Bolt Circle

Right Thread Direction

Compare
photo not available
            
26731--5T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Disc Brake Rotor - (M22 x 1.5) Serrated StudFNAluminum (Dual)OEM Part Number

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
27231--0T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard DrumBSN or FNN/AStud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Drive Stud: P/N: 161832 (5/8"-18)

No Fastening

Compare
photo not available
            
27231--3T10 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Drive Stud: P/N: 161832 (5/8"-18)

Right Thread Direction

Compare
photo not available
            
27231--3T-7110 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNSteel (Dual)OEM Part Number

AFM P/N 27231--0T-71. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
27231--5T-7110 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)OEM Part Number

AFM P/N 27231--0T-71. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
27231--7T-7110 Stud Hub w/11.25 (285.75MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated StudFNAluminum (Dual)OEM Part Number

AFM P/N 27231--0T-71. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
27601--3T-7110 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5 Serrated Stud)FNSteel (Dual)OEM Part Number

AFM P/N 27601--NT-71. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
27601--5T-7110 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5 Serrated Stud)FNAluminum (Dual)OEM Part Number

AFM P/N 27601--NT-71. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
27601--7T-7110 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5 Serrated Stud)FNSteel/AlumOEM Part Number

AFM P/N 27601--NT-71. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
27601--NT-71 photo
            
27601--NT-7110 Stud Hub w/11.25 Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5 Serrated Stud)FNSteel/AlumThis hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Drive Stud: P/N: 161832 (5/8"-18)

Right Thread Direction

Compare
photo not available
            
27691--3T-7110 Stud Hub w/13.189 Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5 Serrated Stud)FNSteel (Dual)OEM Part Number

AFM P/N 27691--NT-71. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
27691--5T-7110 Stud Hub w/13.189 Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5 Serrated Stud)FNAluminum (Dual)OEM Part Number

AFM P/N 27691--NT-71. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
27691--7T-7110 Stud Hub w/13.189 Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5 Serrated Stud)FNSteel/AlumOEM & AFM Part Number

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
27691--9T-7110 Stud Hub w/13.189 Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5 Serrated Stud)FNOEM Part Number

AFM P/N 27691--NT-71. No studs installed

Stud Standout (Cast drums): Dimensions shown are for brake drums having (.50) back plate thickness. Deduct (.06) from these dimensions when using brake drums having (.56) back plate thickness.

Drive Stud: P/N: 161834 (5/8"-18). This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset.

Right Thread Direction

Compare
photo not available
            
5580Z--ATWheel 5 Spoke 20"SpokeDemountable RimDrum Bolt Kit: P/N 90305

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710 Rim Spacer: 42040

N/A

Compare
photo not available
            
5682Z--ATWheel 6 Spoke 22"SpokeDemountable RimObsolete. Can replace with 2343 hub pilot system by replacing hub, drum, and wheels.

Drum Bolt Kit: P/N 90305

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710 Rim Spacer: 42040

N/A

Compare
photo not available
            
70009--AWheel 3 Spoke 15" SpokeDemountable RimObsolete. Replace with 7015 and matching drum

Grease Hubcap Kit: P/N 73655. Drum Bolt Kit: P/N 90315

Rim Stud: P/N 171027 Rim Clamp: 3314 Rim Clamp Nut: P/N 74710 Rim Spacer: 41540

N/A

Compare
photo not available
            
70159--ATWheel 3 Spoke 15" SpokeDemountable RimGrease Hubcap Kit: P/N 73655. Drum Bolt Kit: P/N 90315

Rim Stud: P/N 171027 Rim Clamp: 3314 Rim Clamp Nut: P/N 74710 Rim Spacer: 41540

N/A

Compare
photo not available
            
73209--AWheel 3 Spoke 20"SpokeDemountable RimObsolete. Replace with 7520

Grease Hubcap Kit: P/N 73655. Drum Bolt Kit: P/N 90305

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710 Rim Spacer: 42040

N/A

Compare
photo not available
            
75209--ATWheel 5 Spoke 20"SpokeDemountable RimGrease Hubcap Kit: P/N 73655. Drum Bolt Kit: P/N 90305

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710 Rim Spacer: 42040

N/A

Compare
photo not available
            
75229--AWheel 5 Spoke 22"SpokeDemountable RimObsolete. Can replace with 2023 hub pilot system by replacing hub, drum, and wheels.

N/A

Compare
photo not available
            
76229--AWheel 6 Spoke 22"SpokeDemountable RimObsolete. Can replace with 2023 hub pilot system by replacing hub, drum, and wheels.

Grease Hubcap Kit: P/N 73655. Drum Bolt Kit: P/N 90305

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710 Rim Spacer: 42040

N/A

Compare
photo not available
            
76229--ATWheel 6 Spoke 22"SpokeDemountable RimObsolete. Can replace with 2023 hub pilot system by replacing hub, drum, and wheels.

Grease Hubcap Kit: P/N 73655. Drum Bolt Kit: P/N 90305

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710 Rim Spacer: 42040

N/A

Compare
photo not available
            
83153--AWheel 3 Spoke 15" SpokeDemountable RimObsolete - See Webb service bulletin 105 for replacement information. Must change hub, drum, and wheel. Click here for SB 105

No Fastening

Compare
photo not available
            
83203--AWheel 3 Spoke 15" SpokeDemountable RimObsolete. Replaced by 8520

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710

No Fastening

Compare
photo not available
            
83223--AWheel 3 Spoke 22" SpokeDemountable RimObsolete. Replaced by 8522. See Bulletin #122 for hub replacement

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710 Rim Spacer: 42040

No Fastening

Compare
photo not available
            
85223--AWheel 5 Spoke 22" SpokeDemountable RimObsolete. See Bulletin #122 for hub replacement with 1221

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710 Rim Spacer: 42040

No Fastening

Compare
photo not available
            
85203--AWheel 5 Spoke 20"SpokeDemountable RimGrease Hubcap Kit: P/N 73655. Drum Bolt Kit: P/N 90305

Rim Stud: P/N 171027 Rim Clamp: 16123 Rim Clamp Nut: P/N 74710 Rim Spacer: 42040

N/A

Compare
photo not available
            
20251--08 Stud hub for use with Asian 8 hole wheelBSN or FNSteel or AlumObsolete. User is able to convert to 20231--0T 10 hole system. User changes hub, drums, and wheels.

Designed to use with Asian 8 hole disc wheel

No Fastening

Compare
photo not available
            
1622TBSNSteel or AlumObsolete. Replace with 2623 assembly only. Must change hub and drum

No Fastening

Compare
photo not available
            
1623TBSNSteel or AlumObsolete. Replace with 2623 assembly only. Must change hub and drum

No Fastening

Compare
photo not available
            
26231--0T10 stud OB Drive hub Axle group 21 (8.78 drum pilot unimount)BSN or FNSteel or AlumNo Fastening

Compare
photo not available
            
25291--0T10 sud hub outboard steer axleBSN or FNSteel or AlumObsolete. Can replace with 2520 assembly with drum.

No Fastening

Compare
photo not available
            
20291--0T8 Stud Alum Hub w/10.827 (275MM) Dia. Bolt Circle. Uses Outboard Drum (M22 x 1.5) Serrated Stud FNN/AObsolete . Replace with 2027 ductile hub.

This hub designed for dual wheel mounting or single wheels with 1/2" maximum offset. All drums listed for use with 8-hole, 275MM B.C. USA Mounting Systems.

Grease Hubcap Kit: 73655

Right Thread Direction

Compare
photo not available
            
2773--0T-712773 ASSY w/ABS & OIL FILL PLUGFNSteel or AlumRight Thread Direction

Compare
photo not available
            
25062--3T-2200PPreset 2506 assy for single alum wheel (Tang)BSN or FNAluminumSee SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
25062--3T-2300PPreset 2506 assy for single alum wheel (D-Flat)BSN or FNAluminumSee SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
25202--1T-2300PPreset 2520 assy for steel wheel (D-Flat)BSN or FNSteelSee SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
25202--3T-2200PPreset 2520 assy for steel wheel (Tang)BSN or FNAluminumSee SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
25302--7T-2300PPreset 2530 assy for single alum wheel (D-Flat)BSN or FNAluminumSee SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
26432--5T-2200PPreset 2643 assy for dual alum wheelsBSN or FNAluminum (Dual)See SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
21032--3T-2200PPreset 2103 assy for steel wheelsBSN or FNSteel (Dual)See SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
21032--5T-2200PPreset 2103 assy for alum wheelsBSN or FNAluminum (Dual)See SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
23032--3T-2200PPreset 2303 assy for steel wheels - P spindleBSN or FNSteel (Dual)See SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
23032--5T-2200PPreset 2303 assy for alum wheels - P spindleBSN or FNAluminum (Dual)See SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Compare
photo not available
            
25202--3T-2300PPreset 2520 assy for single aluminum wheel (D-Flat)BSN or FNAluminumSee SD-159 for installation procedure - webbwheel.com/aftermarket_literature.php

Right Thread Direction

Search




  Facebook  YouTube  Linked In  Twitter   Instagram

Contact Us

AFTERMARKET
Toll Free: ‍800-633-3256 • Fax: ‍256-739-6246 • Email: sales@webbwheel.com

OES AFTERMARKET
Toll Free:‍888-857-9677 • Sales Email: oessales@webbwheel.com

OEM TRAILER 
Toll Free: ‍866-824-8753 • Sales Fax: ‍812-548-0970
General Mailbox: oemsales@webbwheel.com

OEM SPECIALTY TRUCK
Phone: ‍812-548-5460 • Main Fax: ‍812-548-5493
General Mailbox: oemsales@webbwheel.com